Luxury Click Vinyl flooring

EchoWood Luxury Click Vinyl flooring is available in a floating, click system that is easy to install. It requires no under layer and delivers a quick and hassle-free turnaround time. It can be installed over existing flooring, such as tiles and because it is a semi-permanent floor, it can be lifted and reinstalled in another area if required.

Flooring composition and colour

Composite vinyl is made up of several layers. It has a layer of vinyl, a layer of PVC, a filter layer, a decorative layer and a layer of clear vinyl on top to protect everything.

• 10 years Residential and
• 10 years Commercial Warranty
• Luxury Click – 2.045m2
• 10 Planks per box
Do not install vinyl floors in areas exposed to direct sunlight, unless protected by sun control film, blinds etc.

Colour selection

Please note that our product samples provide a more accurate colour than online photographs and printed collateral.

Endless advantages to the EchoWood Click Vinyl flooring range

Size  Thickness and wear layer: 4mm / 0.5mm   

Product specifications and technical data

  • Water resistant
  • Stain resistant
  • Easy to clean
  • Durable and resilient
  • Hygienic
  • Soundproof
  • Cost effective
  • Slip resistant
  • NanoSilver TechnologyTM
  • Eco-friendly
  • Minimal maintenance and no underlay required
  • International SGE, SE quality certification
  • Expansion and contraction rate is less than 0.09%
  • South African Vinyl Association quality approved
  • Warranty: 10 Years residential and  commercial

Technical data

Type and compositionPVC Laminated floor covering
ApplicationResidential and light commercial
Surface treatmentPU and anti-bacterial per design
Surface profileBevelled | Non-bevelled per design
Tile size169 x 1210mm
Total thickness4.3mm
Wear layer thickness0.5mm
Fire ratingEN 13501-1 | Bn-S1
ASTM E 648 | Class 1
ATSM E 84 | 75 or less
Mekel burner test | Pass
Heat stability0.3mm I 0.01” (80°C + 2°C, 6hr/hr)
Abrasion resistance0.1% Loss
Slip resistanceExceeds ADA requirement
Static coefficient of frictionDry: 0.72 (≥0.50) | Wet: 0.67(≥0.50)
Residual indentation≥6
Colour fastness≥6

Stain and chemical resistance (KSM 3802, 24hr exposure)

95% Ethyl Alcohol0Soy Bean Oil0
Nitric Acid 70%1Hydrochloric Acid0
Cement Paste0Lubricant0
Sulphuric Acid 96%1Kerosene0
10% Ammonium Hydroxide0Coffee0
Methylene Chloride2Sesame Oil0
Soy Sauce0Acetone2
Acetic Acid0Ketchup0
Nail Polish Remover2


Width × Length Content per carton
mmPCSsqm (m2)
169 × 1220102.045

Find us on: