Luxury Glue Down Vinyl flooring

For best results, Echowood glue down vinyl planks should ideally be installed using  a Wanabiwood- approved adhesive, over a self- levelling screed substrate. The durability and moisture-resistance properties offered by Luxury vinyl planks make them the perfect choice for almost all residential and light commercial applications.

Flooring Luxury Glue Down Vinyl

Flooring composition and colour
Echowood Luxury glue down planks offer an un-surpassed choice of natural wood effects and colours, all brought to life through the marvels of the print sheet. The clear wear-layer will ensure your new floor is protected from the rigours of daily living while ease of maintenance is ensured, thanks to the UV coating.
• 10 years Residential Warranty
• 10 years light Commercial Warranty
• Luxury Glue Down – 3.32m2
• 19 Planks per box
Do not install vinyl floors in areas exposed to direct sunlight, unless protected by sun control film, blinds etc.

Colour Selection

Please note that our product samples provide a more accurate colour than online photographs and printed collateral.

Endless advantages to the EchoWood Luxury Glue Down Vinyl flooring range

  • Water resistant
  • Stain resistant
  • Easy to clean
  • Durable and resilient
  • Hygienic
  • Soundproof
  • Cost effective
  • Slip resistant
  • NanoSilver TechnologyTM
  • Eco-friendly
  • Minimal maintenance and no underlay required
  • International SGE, SE quality certification
  • Expansion and contraction rate is less than 0.09%
  • South African Vinyl Association quality approved
  • Warranty: 10 Years residential and 10 Years light commercial

Product specifications and technical data

Size  Thickness and wear layer: 3mm / 0.3mm

Technical data

95% Ethyl Alcohol0Soy Bean Oil0
Nitric Acid 70%1Hydrochloric Acid0
Cement Paste0Lubricant0
Sulphuric Acid 96%1Kerosene0
10% Ammonium Hydroxide0Coffee0
Methylene Chloride2Sesame Oil0
Soy Sauce0Acetone2
Acetic Acid0Ketchup0
Nail Polish Remover2


Width × Length Content per carton
mmPCSsqm (m2)
184mm × 950mm193.32

Stain and chemical resistance (KSM 3802, 24hr exposure)

Type and compositionPVC Laminated floor covering
ApplicationResidential and light commercial
Surface treatmentPU and anti-bacterial per design
Surface profileMedium embossed
Tile size184mm × 950mm
Total thickness3.0mm
Wear layer thickness0.3mm
Fire ratingEN 13501-1 | Bn-S1
ASTM E 648 | Class 1
ATSM E 84 | 75 or less
Mekel burner test | Pass
Heat stability0.3mm I 0.01” (80°C + 2°C, 6hr/hr)
Abrasion resistance0.1% Loss
Slip resistanceExceeds ADA requirement
Static coefficient of frictionDry: 0.72 (≥0.50) | Wet: 0.67(≥0.50)
Residual indentation≥6
Colour fastness≥6

Find us on: